|
Very
Low Viscosity, Non-Toxic Secondary Refrigerant Antifreeze. Based on Potassium
Formate blended with BS6580 proven Corrosion, Scale and Biological Inhibitors. |
Density: |
1.2
– 1.4 g/cm3 depending on inhibitors |
PH: |
8.0
– 9.5 depending on inhibitors. |
Boiling
point: |
>100°C |
COOLFLOW LVF has been
especially formulated from Potassium Formate for use as a Non-Toxic Secondary
Refrigerant Antifreeze in Process Cooling, Refrigeration and Air Conditioning
systems. It has much improved thermal efficiency in comparison with glycol
based solutions.
It contains synergistic corrosion inhibitors
to protect metals commonly found in such systems. It has been tested in accordance
with BS5117 and found to meet BS6580 corrosion standards for mild & stainless steel,
aluminium, copper, brass and cast iron.
Zinc or galvanised components are not
recommended for use with closed loop cooling or heating systems.
COOLFLOW
LVF also contains scale and biological inhibitors to help prevent
fouling – thus promoting long operational life and high thermal efficiency.
COOLFLOW
LVF mixtures
are readily biodegradable (90% over ten days) and will not remain in the environment
or bio-accumulate.
COOLFLOW LVF is supplied Ready-To-Use,
premixed with the necessary weight of UltraPure™ water to achieve the desired
freeze protection.
COOLFLOW LVF is a clear, low
viscosity liquid. It is salty to the taste and has a non-pungent but characteristic
aroma.
As per BSRIA guide AG 1/2001.1 all pipe-work
systems should be clean and free from biological contamination prior to commissioning.
To minimise corrosion air* ingress and exposure
should be minimized. A pressurised system is best.
* Oxygen feeds the corrosion
process which consumes inhibitors.
Health & Safety: Please refer to the associated
Safety Data Sheet.
Shelf Life: 3 years when stored in sealed containers
out of direct sunlight.
Available in: 5, 10, 15, 20, 25, 205 & 1,000 litre
containers and in bulk tankers.
COOLFLOW LVF is supplied as
a Ready-To-Use Secondary Refrigerant Antifreeze, as per the table.
|
|
Viscosity m Pas (cP) at 20°C
|
Thermal Conductivity (W/mK)
|
|
|
|
|
|
1.24 |
LVF30 |
-30 |
2.2 |
0.54 |
1.26 |
LVF40 |
-40 |
2.6 |
0.52 |
1.31 |
LVF50 |
-50 |
3.0 |
0.50 |
1.35 |
LVF60 |
-60 |
3.9 |
0.47 |
1.39 |
When measuring
the percentage of COOLFLOW LVF in the system use a refractometer.
SUREFLOW Support
Services ensure that end users and distributors receive the full benefit of
working with a specialist manufacturer. Specifically;
- Expert technical advice
on all aspects of fluid selection, including Environmental Impact Assessments,
Thermal Performance etc.
- Fluid Maintenance Program; for the proactive
verification of fluid and system condition.
- Huge stock inventory facilitating
same day dispatch and delivery.
- Bespoke formulations for specialist applications.
|
High
Efficiency Non-Toxic Secondary Refrigerant Antifreeze. Based on Ethylene
Glycol blended with patented DeToxTM additive and BS6580 proven Corrosion,
Scale and Biological Inhibitors. |
|
Ecologically
and Environmentally Friendly Non-Toxic Secondary Refrigerant Antifreeze.
Based on Refined Vegetable Extracts blended with BS6580 proven Corrosion,
Scale and Biological Inhibitors. |
|
Non-Toxic
Secondary Refrigerant Antifreeze. Based on Propylene Glycol, blended
with BS6580 proven Corrosion, Scale and Biological inhibitors. |
|
Industrial
Grade Secondary Refrigerant Antifreeze. Based on Ethylene Glycol, blended
with BS6580 proven Corrosion, Scale and Biological Inhibitors. |
|
