Secondary Refrigerant Antifreeze

Anti-Freeze	Optimum Flow	Biodegradeable	Corrosion Control	Quality Assured



COOLFLOW IGE has been especially formulated from Ethylene Glycol for use as an Industrial Grade Secondary Refrigerant Antifreeze in Process Cooling, Refrigeration and Air Conditioning systems, where toxicity is not an issue. It contains synergistic corrosion inhibitors to protect metals commonly found in such systems. It has been tested in accordance with BS5117 and found to meet BS6580 corrosion standards for mild & stainless steel, aluminium, copper, brass and cast iron. Zinc or galvanised components are not recommended for use with closed loop cooling or heating systems.

COOLFLOW IGE also contains scale and biological inhibitors to help prevent fouling – thus promoting long operational life and high thermal efficiency.

COOLFLOW IGE mixtures are readily biodegradable (90% over ten days) and will not remain in the environment or bio-accumulate.

COOLFLOW IGE is miscible with water in all proportions and can protect RAC systems down to -50°C depending on concentration.

COOLFLOW IGE exhibits super-cooling characteristics and mixtures containing in excess of 55% by volume do not freeze solid, alleviating any concern over possible expansion and burst damage.

COOLFLOW IGE is a clear, slightly viscous liquid. It is mildly sweet to the taste and has a non-pungent but characteristic aroma

As per BSRIA guide AG 1/2001.1 all pipe-work systems should be clean and free from biological contamination prior to commissioning.

To minimise corrosion air* ingress and exposure should be minimized. A pressurised system is best.
* Oxygen feeds the corrosion process which consumes inhibitors.

Determine the total system volume and add COOLFLOW IGE to the system according to the minimum operating temperature required (see table). The minimum dose of COOLFLOW IGE should not be less than 25% of the system volume and the maximum does not normally exceed 60%. We recommend the use of deionised, distilled or UltraPure™ water for this dilution. Avoid water containing high levels of calcium salts or Chlorides [Cl-].

Health & Safety: Please refer to the associated Safety Data Sheet.

Shelf Life: 3 years when stored in sealed containers out of direct sunlight.

Available in: 5, 10, 15, 20, 25, 205 & 1,000 litre containers and in bulk tankers.

COOLFLOW IGE can also be supplied pre-mixed, as a Ready-To-Use solution.

When measuring the percentage of COOLFLOW IGE in the system use a refractometer.

SUREFLOW  Support Services ensure that end users and distributors receive the full benefit of working with a specialist manufacturer. Specifically;

• Expert technical advice on all aspects of fluid selection, including Environmental Impact Assessments, Thermal Performance etc.
• Fluid Maintenance Program; for the proactive verification of fluid and system condition.
• Huge stock inventory facilitating same day dispatch and delivery.
• Bespoke formulations for specialist applications.

	High Efficiency Non-Toxic Secondary Refrigerant Antifreeze. Based on Ethylene Glycol blended with patented DeToxTM additive and BS6580 proven Corrosion, Scale and Biological Inhibitors.

	Ecologically and Environmentally Friendly Non-Toxic Secondary Refrigerant Antifreeze. Based on Refined Vegetable Extracts blended with BS6580 proven Corrosion, Scale and Biological Inhibitors.

	Non-Toxic Secondary Refrigerant Antifreeze. Based on Propylene Glycol, blended with BS6580 proven Corrosion, Scale and Biological inhibitors.

	Very Low Viscosity Non-Toxic Secondary Refrigerant Antifreeze. Based on Potassium Formate blended with BS6580 proven Corrosion, Scale and Biological Inhibitors.